With 80-90% of dirty guns reported to cause some sort of mechanical problems, cleaning your firearm is vital for your safety and those around you.
But cleaning a gun is not as straightforward as you think. It involves tearing down the firearm to every pin and part. Here’s how to clean a gun the right way:
Step 1: Disassemble the Gun
Before you begin, we recommend you put on a pair of latex or nitrile gloves.
This protects your skin from gun chemicals and acids. Double-check to ensure that your gun is unloaded. You can do this by inspecting and feeling the magazine and chamber.
Next, remove the barrel, guide rod, spring, and slide, while referencing your owner’s handbook if necessary. This gives you access to the majority of the gunk buildup within the firearm. Place the components in front of you, on a towel-covered surface, along with a container for the small parts that could be misplaced.
Step 2: Clean Your Gun
This process involves removing any loose particles found within the chamber, cylinder, slide, and frame using a cleaning tool such as cleaning swabs and utility brushes. Check for dust and lint inside the frame areas, especially for carried handguns.
A light application of a cleaning agent can be used to remove heavy debris before brushing. Wipe with a cloth to remove the cleared fouling.
Moving on to the barrel, add some bore cleaner to a cleaning patch and run it through the barrel using a cleaning rod. Check the amount of residue and debris that comes off your firearm as you swipe through with the patch.
To prevent the brush tip from getting stuck, run it through the barrel before reversing. Follow up the bore cleaner-soaked patch with dry ones to ensure your barrel is dry and clean. You can find all cleaning gun gadgets online.
Swabs can be used to clean hard-to-reach regions in the slide and frame. A heavier-duty cleaning agent can also be used to clean clogged barrels and chambers.
Step 3: Lubrication
Learning how to clean surface rust off a gun using lubrication is critical to safeguard your valuable investment. This prevents parts of your firearm from rubbing against each other and creating wear and tear.
Over-oiling your gun can be as damaging to the performance and components as a bone-dry weapon. You should also avoid pouring oil on your pistol. Instead, use a clean cloth or cotton swab to wipe the recoil spring, slide rails, barrel, and any other nooks and crannies.
Step 4: Reassemble Your Gun
The last step of how to clean a handgun is as crucial as the first. When you’re certain that your weapon is completely dried and clean, reassemble the pieces.
Give it a few tests to ensure that you haven’t knocked anything out of place while cleaning. Perform a dry fire and run it to ensure that everything works well.
Now You Know How to Clean a Gun Like a Pro
You should now have a clear picture of how to clean a gun with household items the right way. Ensure to do this routinely to avoid corrosive particles from accumulating and have a safe
For more insightful posts be sure to check our blog.
