Zippers feature two interlocking teeth sets known as chain zippers, or coils referred to as coil zippers, each connected to the fabric tape strip. The coils or teeth are made from plastic, metal, or synthetic material. A slider with a tab that can be completely functional or used as a decorative function is used for opening and closing the zipper. https://www.zippershipper.com is the number 1 zipper website in the USA where you can find the largest collection of zippers.
In case you don’t know it, the teeth size is actually a very important consideration when shopping for zippers for your next project. How will you know what type of zipper teeth you need when you place an order, then? Do the teeth even make a big difference in the first place?
Options for Teeth Size
When it all boils down to the choices you can pick from, the size of zipper teeth size can range from 3MM and can reach as much as 35MM. The measurement describes the teeth’ width from one end to another.
Take a good look at the standard pouch or wallet to start. The first thing you will notice is that the zipper is generally a small or thin nylon coil zipper. This is the usual size of 3MM. The same thing applies to the standard invisible zippers. Unless this is made for dresses, the teeth’ size is also 3MM.
Now, think of the standard lightweight jacket. The general rule here is to go for a lighter zipper to ensure that the jacket doesn’t get weighed down. It is for this reason that the size often falls in the range of 5MM to 6MM. This is key for all types of zippers including coil, plastic, or metal. The teeth’ size is almost always located behind the zipper puller.
For leather jackets or outerwear or, it is always recommended to use heavy-duty zippers. This specific category belongs to the zipper width of 7MM to 8MM. This specific teeth size is made sturdy enough to attach to the item without breaking. The teeth’ size is almost always located behind the zipper puller.
Next, other items like duffel bags, backpacks, heavier weight bags, and even luggage will require even bigger size teeth. If you take a look at items like this, you can tell that the zipper teeth are typically bigger than wallet size zippers. It is because designers aim for sufficiency and sturdiness all in the same zipper. The typical range of teeth size is somewhere from 8MM up to 15MM that depends on the item. The puller almost always reflects the teeth’ size.
You might be thinking, who would be interested in a zipper bigger than this range? It turns out that there are fashion designers who prefer the large teeth available for sale. It is the 35MM zipper. This can be used as a functional zipper although it also acts as an accessory. Due to its limited availability and unique style, you can always buy them by custom order.